YEELIGHT

Yeelight Cube Setup Instruction

I. How to connect Cube with Yeelight Station Mobile APP

  1.   Download Yeelight Station

    • For iOS: Download Yeelight Station from the App Store *Requires iOS system 16.2 or above.
    • For Android: Download Yeelight Station from Google Play *Requires Android system 7.0 or above.
 

  1.   Device Networking

    1. Reset Cube: Press and hold the power button for 5 seconds within the first minute after turning on the device. The device will start to reset to its factory settings, indicated by breathing blue light. When the device becomes a rainbow flow light, it means that the reset is successful.
    1. Add Device: Click the “+” icon on the Yeelight Station homepage, scan the “Matter” QR code on the control box, and add the device. *Note that your phone needs to have Bluetooth turned on and be connected to a 2.4GHz WiFi network.
     

  1.   FAQ for Cube

 
Question
Answer
  1.  
What is the input voltage of the product adapter?
The product adapter supports an input voltage of 100V-240V.
 
  1.  
What is the voltage of the product itself?
The voltage of the product itself is 12V.
  1.  
What is the maximum number of Cubes that a single control box and adapter can support?
Max supports 6 Cubes.
 
  1.  
Which smart control platforms does the product support?
The product is compatible with Matter and can be connected to all smart platforms that support Matter.
  1.  
What is the reason if the product cannot connect to the network?
  1. Ensure iOS system version 16.2 or above and Android version 7.0 or above.
  2. Ensure the latest version of Yeelight Station app has been downloaded from the app store.
  3. Ensure the phone is connected to a 2.4GHz network with functioning internet.
  4. Ensure the phone’s Bluetooth feature is enabled.
  5. Ensure the device is powered on and in pairing mode. To reset: within one minute of the device being powered on, press and hold the control box button for 5 seconds until the light flashes blue, then release. Rainbow lights indicate the reset is complete.
  6. iOS users should ensure that the Home app has been granted iCloud authorization.
  7. iOS users should navigate to the phone’s system settings (Settings) — Security & Privacy — Local Network — and toggle on the Yeelight Station switch.
  8. If iOS 16.4.1 users encounter device connection failures (error code 1021815), they can try restarting their iPhone and attempting to reconnect.
  1.  
How to reset the device?
Press and hold the power button for 5 seconds within the first minute after turning on the device. The device will start to reset to its factory settings, indicated by breathing blue light. When the device becomes a rainbow flow light, it means that the reset is successful.
  1.  
What functions does the touch button have?
  1. Short press to turn on the device when it’s off
  2. Short press to switch different scenes when it’s on
  3. Long press for 2S to shut down the device
  1.  
Can I mix and match the different Cubes together?
Yes. But if the amount or type of Cubes is changed, users will need to reset the device on mobile APP to ensure normal operation.
  1.  
What are the requirements for the mobile phone system during device pairing?
iOS system version 16.2 and above; Android system version 7.0 and above.
  1.  
How to upgrade the firmware?
Approach the device with the phone, enter the device control page->settings->firmware upgrade page. If there is a firmware update detected, click “Upgrade Now” to update the device firmware.
  1.  
What to do if one of the lamps is not on when the device is on?
The default combination when not paired is four Matrix/Panel Cubes plus two Spot Cubes. If the number of lights in each module is different from the default, the extra device will not light up. Simply pairing the device and setting the combination according to the actual number will fix the issue.
  1.  
How to delete the device?
Enter the device control page->settings->upper-right corner “…”->delete device.
For offline devices, click the offline device box, click “…” ->delete device.
  1.  
For iOS users who download the Yeelight Station app and experience no response when clicking “Add Device” or no response after scanning the QR code, how should they proceed?
Due to the pairing dependency of Matter devices on a home hub, it is necessary to open the Home app, agree to “Enable iCloud,” and then reopen the Yeelight Station app to successfully trigger the pairing prompt.
 
  1.  
My Yeelight Station mobile app does not respond when I click on the firmware upgrade notification. How to troubleshoot the issue?
Please follow these steps:
  1. Log out of your Yeelight Station account.
  2. Log back into your Yeelight Station account.
  3. Navigate to the firmware upgrade section or check for firmware updates, and try to upgrade the firmware again.

II. How to connect Cube with Yeelight Station for PC

  1.   Download Yeelight Station for PC

    • Requirements for computer systems: Windows 8 and above; not supported on MacOS for now.

  1.   User Guide for Yeelight Station for PC

  1.   FAQ for Yeelight Station PC version:

 
Question
Answer
  1.  
What devices are supported by Yeelight Station for PC?
  • Yeelight Cube Smart Lamp
  • Yeelight Monitor Light Bar Pro
  • Yeelight Lightstrip Pro
  • Yeelight Smart Bulb 1S (Color)
  • Yeelight Lightstrip 1S
  • Yeelight D2 Smart Lamp
  • Yeeligt GU10 Smart Bulb (Color)
  • Yeelight Smart Bulb W3 (Color)
  • Yeelight Cube
  1.  
What to do if device is not found when adding the device?
Please check the following steps:
  • Check if the device’s power is properly connected.
  • Check if the device has been connected to the internet and whether the network is in good condition.
  • Check if the computer and the device are connected to the same network.
  • Check if the device has enabled LAN mode in the Yeelight App.
  • Check if the device firmware is up to date.
If you still cannot find the device, please check if the antivirus software is on. If so, please try switching off antivirus software, and restarting Yeelight Station.
  1.  
The LAN mode of the device has been enabled, but Yeelight Station still cannot detect the device. How can I check if the device is on the same network as the computer?
Open the command prompt window on your computer and enter “ping 192.168.XXX.XXX” (you can find the device’s network IP address in the device settings on the mobile app). If you receive a “Reply” command, it means that the device and the computer are on the same LAN. If you receive a “Timeout” command, it means that the computer and the device are not on the same LAN. Please check if the router has network isolation enabled, and connect the computer and the device to the same LAN before trying again. Alternatively, please check if your device is on the list of devices supported by Yeelight Station.
  1.  
If a device that has already been added is offline, how to fix this issue?
 
Please check the following:
  • Re-power the device.
  • Check if the computer and device are on the same network.
  • Check if the network where the device is connected is working.
 
Scroll to Top

Select your country and region

Note: You will be redirected to local site

Mainland China
Czech Republic
Malaysia
Russia [Marvel]
Russia [diHouse]
Taiwan, China
Taiwan, China (Yeelight Pro)
Turkey
Vietnam
Singapore [HOST]
Singapore [TTG]
Poland
Japan
Hong Kong 【USUB】